- Thermocouples provide a low-cost, reliable means of measuring a wide temperature range (32 F to 1873 F or 0 to 1023 C). This cost-effective kit includes three thermocouples, documentation and the DS2760 module.

- The LM34 Temperature Probe is efficiently utilized with the ADC0831 A/D converter and well-documented in our Process Control text. Measures +32 Deg F to +212 Deg F with an output of 1 mV/degree F.

- Electronic temperature sensor rated is rated: -45°C to +125°C; performance specified: -25°C to +105°C; output is 1 mV/K. This sensor is ideal for submersing in liquid environments. Well documented in our Applied Sensors text.

- Measures air temperature in units of 0.5° Centigrade (C) from -55° C to +125° C. [In Fahrenheit (°F), units of 0.9° F and a range of 67° F to +257° F.] Pre-calibrated, synchronous serial interface is very easy to use.

- Built around the Hitachi HM55B compass sensor in a 0.3” wide 6-pin DIP module, this sensor provides a synchronous serial interface with an accurate 128 compass directions.

- It is a complete, serially controlled, drive system for unipolar stepper motors. The desired operating speed, ramp time and drive mode can be configured once and then a single command used as required, to move to fixed or relative positions.

- These RF modules are used to send remote control data back and forth between two or more BASIC Stamp modules. Transmission range is 150 feet and the solid antenna is 2 inches long.

- Low-cost infrared phototransistor package can be used to detect objects or difference in black and white.

- The TSL230 precisely measures light using an array of photodiodes, with an output of digital square waves.

- Useful for robotics and detecting varying degrees of light intensity, a photoresistor simply can't be beat at such a low price.

- Parallax's new PING))) ultrasonic sensor provides a very low-cost and easy method of distance measurement up to three (3) meters.

- This infrared sensor can detect objects within a range of 4-30". Requires the ADC0831 (sold separately). A custom cable is also available to make for an easy interface

- QT113 family QTouchT ICs create sense fields through dielectric surfaces such as plastic or glass up to 100mm (4") thick, and can even turn small objects into sensors.

- 0V is no force and 4.2V is 100 lbs. The RCTIME command may be used with a LOOKUP table or calibration formula to execute some math to make the output useful.

- Whether used as a vibration sensor, a flexible switch, or a frequency response device piezo film is an interesting sensor to interface with BASIC Stamps.

- This is a cost-effective and highly functional hall-effect sensor. Place a magnet near the sensor to measure detection or RPM on a shaft or turning object.